Energy-saving Renovation Plan for Underground Parking Lot Lighting

Introduction to Tachyon LED

This scheme is based on T8 fluorescent tubes used in factories, workshops, shopping malls, supermarkets, classrooms, hospitals, airports and underground garages. This kind of light source uses 8W inductive rectifier, and the actual total power consumption is 44w, which consumes a lot of electric energy every year, and there is buzzing noise and strobe, so it is necessary to replace the lamp tube and starter frequently, and the maintenance is quite cumbersome.

Tachyon LED flood light instead of ordinary T8 fluorescent lamp is adopted by many real estate developers and property companies. It is the fastest and most effective scheme for lighting energy saving transformation, and it is also a major measure for the world to promote energy saving and environmental protection.

The brightness of Tachyon 50W LED shoebox flood light  is equivalent to that of 200w fluorescent lamp. The power factor is more than 0.9 and the loss is small. Compared with fluorescent lamp, it can save 80% of electric energy,   No mercury, no ultraviolet, large input voltage range, no noise and stroboscopic characteristics. It is the preferred energy-saving light source for energy-saving reconstruction project, suitable for 24-hour lighting reconstruction.

Tachyon LED

1. More energy efficient:

50W Tachyon LED flood lamp can replace ordinary 200w fluorescent lamp and save about 80% electricity,

2. Small light attenuation, long service life: Tachyon LED lamp adopts independent innovation production process, with small light decay and long service life of light source of 50000 hours. The average light loss of 50000 hours is less than 5%, which is once and for all. The service life of ordinary fluorescent lamp tube: 3000 hours, and it needs to be replaced in less than a year,
3. Fast cost recovery: Tachyon LED lamp in a shorter time and cost recovery,
4. Reduce pollution: Tachyon LED lamp does not contain metal mercury, which can reduce carbon dioxide emission (0.39kg carbon dioxide emission can be reduced per kilowatt hour). Fluorescent tube fluorescent lamp is ultraviolet light source, which is converted into white light by phosphor, and LED white light lamp is blue chip, which is converted into white light by yellow phosphor. The light source has a narrow wave range and can be controlled in visible light without producing ultraviolet light.
5. Low replacement cost: 3-year warranty, no replacement cost within 2 years,
6. Efficient conversion, reduce heat Traditional lamps produce a lot of heat energy, and Tachyon LED lamp is 95% of the electrical energy into light, greatly reducing the waste of energy. It will not make the documents and clothes fade,
7. Quiet and comfortable, no noise

Tachyon LED lamp does not produce noise, so it is a good choice for the use of precision electronic instruments. Suitable for library, office and other occasions,

8. Soft light, eye protection Traditional fluorescent lamps use alternating current, which often appearsTachyon LED lamp directly converts alternating current into direct current, which will not produce flicker phenomenon and protect eyes. The light distribution technology makes the LED point light source expand to the area light source, increases the luminous surface, eliminates the glare, sublimates the visual effect, and eliminates the visual fatigue,
9. No mosquitoes

Tachyon LED lamp does not produce ultraviolet light  ，  Not like traditional lamps, there are many mosquitoes around the lamp source. The interior will become more clean and tidy,

10. Voltage adjustable AC85V-295V

The traditional fluorescent lamp is lit by the high voltage released by the rectifier, which cannot be lit when the voltage decreases. And Tachyon LED lamp can light up in a certain range of voltage,

11. Strong and reliable, long-term use

Tachyon LED lamp body itself uses epoxy resin instead of traditional glass, which is more solid and reliable. Even if it hits the floor, LED will not be easily damaged, so it can be used safely,

12. Maintenance free:

The frequent switch of LED fluorescent lamp will not cause any damage,

13. Stable work:

Tachyon LED lamp can work at low temperature – 40 ℃   High temperature 55 ℃; The power supply adopts constant current output power supply with over-current, over-voltage, lightning and high temperature protection to fully guarantee the service life and stable performance of the product.

14. Easy to transport

The main material of Tachyon LED flood light is PC and aluminum, which has good vibration resistance and is easy to transport.

Tachyon LED’s solution to replace fluorescent lamps

Project Overview:

the first floor area of the underground garage in a residential area is 10000 square meters, and now there are 1000 ordinary 44W T8 straight tubes. The lighting time is 24 hours a day.

Existing problems:

1. If the safety controller works under the stroboscopic light for a long time, it is easy to have illusions, and the symptom of eye fatigue is caused by using the stroboscopic light, This and that kind of work mistakes often occur, affecting and delaying the production time,
2. The electricity consumption is large, and the annual consumption of fluorescent lighting is about 380000 kwh, only the lighting cost That is, it has increased a lot of costs for the company,
3. The power consumption is as high as 8W, and the annual power consumption is as high as 30000-40000 kwh,
4. The starter and lamp are often easy to be damaged, and the maintenance is frequent and expensive.

Replace the original T8 lamp with Tachyon flood light, which is equal to that of 44w power T8 tube. It can save 80% of energy consumption, and its service life is up to 50000-60000 hours (5000 hours for ordinary T8 pipe). It does not need to use engineering, just remove the whole fixtures of T8,  and install Tachyon LED flood light, that is enough, as it is plug-and-play. Illumination, life and stability are far beyond the original T8 light tube. The most important concern is energy saving. The ratio of total wattage132,000W to 440,000W (Note: power consumption of electronic ballast equipped with T8 tube) is obvious. The company can reduce consumption and save cost.

Product features:

1. Super power saving: Tachyon LED lamp in energy saving than ordinary energy saving lamp 60%, plus the energy saving can reach more than 80% with the independent innovation technology.
2. Super long warranty: from the date of purchase of our products by domestic customers, we promise a 5-year warranty period to avoid worries for customers.
3. Using new integrated technology, the sensor and intelligent driver are integrated into a LED lamp, which is very convenient to install and the price is close to ordinary LED lamp.
4. It has greatly improved the rate of return on investment and achieved remarkable results.

Energy-saving calculate:

Assume that the number of underground garage lights is 1000 pcs 1.2m T8 tube light, 24 hours 365 days use, electricity cost set at $0.2/Kwh.

Lights in use	Fluorescent lamp	LED fluorescent lamp	LED intelligent fluorescent lamp
Wattage	36W plus rectifier 6W = 42W	13W plus power supply 1W = 14W	11W with power supply 1W = 12W   （ At night or during the day, when there is no car, the power is only 3 W, and the average power is about 6 W per hour
Working Hours	24H	24H	24H
Electricity consumption in one year	46W × 24H × 365 days × 1000 ÷ 1000 = 402960 Kwh	16W × 24H × 365 days × 1000 ÷ 1000 = 122640 Kwh	6W × 24H × 365 days × 1000 ÷ 1000 = 52560 Kwh
Electricity charge within one year	402,960 Kwh* $0.2=$80,592	122,640 Kwh * $0.2=$24,528	52,560 Kwh * $0.2=$10,512
According to data comparison, it can be seen that replacing 40W fluorescent lamps in underground garages with LED fluorescent lamps can save electricity bills of $80,592-$24,528=$56,064 a year. Replacing with Tachyon smart LED lights can save electricity bills of $80,592-$10,512=$70,080 for one year. It saves about 87% of electricity costs.