Reasonable Suggestions for Energy Saving and Consumption Reduction

Reasonable recommendations for energy consumption reduction (1):

Recommendations for energy-saving rationalization:

1. Regarding energy-saving and water-saving: the temperature of the air conditioner is the same and recommended 26. Do not turn on the lights during the day. Only consider turning on the lights in cloudy days. Pay attention to the number of lights. Some office places have countless lights, but they don’t need it , It is recommended to turn on the lights at intervals. The three light tubes in a light box can be controlled separately, and all the first ones can be grouped to control, which can save a lot of power. The computer does not need to be shut down in time. Power protection mode,
2. Water saving: saving water, cascading water, tea watering and so on,
3. Paper saving: try to use electronic office as much as possible, communicate with or without emails, print and copy on both sides of the paper, use blank spaces in the manuscripts to be used as notes, save toilet paper (not toilet paper, that can not be saved), most people like to smoke A few, actually one is enough.
   

   Reasonable recommendations for energy saving and consumption reduction (2):

   1. Save electric energy. Be careful to turn off the lights easily and use high-efficiency energy-saving bulbs. According to estimates by the U.S. Energy Department, the use of high-efficiency energy-saving bulbs instead of traditional light bulbs can prevent 400 million tons of carbon dioxide from being released. In addition to electric lights, you should also pay attention to the use of other electrical appliances. Try to choose low-consumption and energy-saving products. Cut off or turn off the power when you are not using electrical appliances. Keep the refrigerator in a frost-free state. When the summer weather is not too hot, it is best to use a fan or electric fan instead of the air conditioner. When using the air conditioner, do not set the temperature too low, just around 26°C.
   2. Save water resources. Many wastewater can be recycled. Water for washing your face, hands, vegetables, bathing, and washing clothes can be collected for cleaning floors, flushing toilets, and watering flowers. Taomi water is a good stain remover and can stay for washing dishes. The oily pots and dishes should be wiped clean with used napkins first. It is convenient to wash and save water, and it can also use less detergent and reduce water pollution.

   3, save paper. The recycling of paper can avoid the release of biogas from landfills and cut down trees. According to statistics, the recycling of one ton of waste paper can produce 800 kilograms of recycled paper, which can save 17 trees. Saving paper means protecting forest resources and protecting the environment.

   4, reduce waste gas emissions. Traffic exhaust and industrial exhaust are the main sources of domestic exhaust. We try to take buses or taxis when we go out, and we can also ride bicycles. Excessive billows of smoke from burning garbage and producing goods in factories filled the city. They should process and filter the exhaust gas, and then discharge it to reduce pollution. Plants can absorb carbon dioxide and then release oxygen, so we have to plant a lot of trees, especially on the roadside.

4. Garbage classification and treatment. Garbage classification can recover valuable resources while reducing the energy consumed by landfill and incineration. For example: waste paper is sent directly to paper mills to produce recycled paper; disposable items such as beverage bottles, cans, and plastics can also be sent to related factories to become renewable resources; household appliances can be sent to specialized manufacturers for decomposition and recycling . At home, you can prepare different garbage bags to collect waste paper, plastic, packaging boxes, etc., sort and recycle garbage every day, and try to turn waste into treasure.

Reasonable recommendations for energy saving and consumption reduction (3):

Advocate control of every expenditure.

Advocate to make good use of every employee. Reasonable division of labor, improve work efficiency and work intentions, improve responsibility and work accuracy, and reduce work errors;

Advocates the adoption of every good policy. Strengthen management, reform and innovation, rationally improve working methods and technological processes, advocate small inventions and small creations, and increase labor productivity;

Advocate to grasp every customer well. Communicate with customers more, solve practical problems for customers with heart, and bring enthusiastic and thoughtful service. For problems raised by customers, they should be reported to relevant leaders as soon as possible, and source rationale opinions should be made within 24 hours;

advocates reducing a gap. Departments and between departments and between people should communicate in a timely and effective manner, eliminate work obstacles, empathize with each other, and create a harmonious working atmosphere.

Reasonable recommendations for energy saving and consumption reduction (4):

1. Strengthen energy management.

Over the years, with the changes in the market climate, our company’s energy management has also fluctuated greatly. At one time there was a full-time organization with clear functions, and at one time there was only one full-time or part-time energy manager. Energy work was even in a state of unmanaged energy. The key to management is, first of all, enterprises must change their outlook on development, change the traditional concept of seeking benefits based on quantity and scale, and truly realize the important benefits of energy conservation and consumption reduction to enterprises and society in terms of their ideas.

To do a good job of energy saving and consumption reduction, there must be clear institutions and personnel responsible for establishing a three-level energy management network; establishing a sound and strict implementation of an energy management system, and timely revision and improvement, combining the process of corporate standardization, and incorporating energy management into corporate standardization Scope; establish and improve energy consumption quotas and corresponding assessment systems. At the same time, improve the enterprise energy measurement system, equip energy measurement instruments in accordance with the requirements of national standards, establish a complete and effective energy data transmission system and energy statistics system, so that energy consumption indicators can truly and objectively reflect the status and level of energy utilization of the enterprise.

The three functions that coking companies must undertake (manufacturing functions of coke and chemical products, energy conversion and recycling functions in the production process, and waste disposal processing functions) make coking companies close to each process and departments. An organic whole that depends on and coordinated development. Therefore, to focus on energy saving and consumption reduction work, we must persist in management innovation, establish a systemic energy saving point of view, break the boundaries between processes and departments, and study the energy-saving and consumption-reducing strategies and measures of the enterprise from the overall level of the enterprise. And energy conservation and consumption reduction management work, and continuously improve the management level of energy conservation and consumption reduction. On the basis of material flow analysis and energy flow analysis, the enterprise energy system and energy structure are optimized.

As long as the world can persist in management innovation, establish an energy management model that fits the actual situation of the enterprise, and continuously improve the level of energy management, we can better tap the energy saving and consumption reduction potential of enterprises and achieve better energy saving and consumption reduction effects.

2. Improve equipment level and eliminate backward production potential

The large-scale process of our company’s coke ovens is accelerating. In 20xx, a 4.3-meter-high coke oven was built and put into operation one after another; various chemical production lines have been built, and a coke oven production line and a crude benzene recovery system must be integrated with the integration process. , Eliminate outdated production potential in time, follow the principle of equal replacement, eliminate old coke ovens with outdated production potential announced by the state, and at the same time aim at the technological frontier of domestic coking enterprises, carefully introduce and apply the latest technology, and enable new projects and technological transformation The project has reached the domestic advanced level not only in technology, but also in energy consumption.

3, optimize product structure

Our company must consolidate the market share of existing products, implement specialized and high-quality production; vigorously develop high-quality metallurgical coke, improve the quality of coke products, and develop high-quality products. Optimizing the product structure and improving the level of equipment, realizing the key link from large to strong, and tapping the potential of energy saving and consumption reduction are also the main ways to reduce energy consumption per unit of output value and energy consumption per unit of industrial added value.

4, adjust the process structure, raw material structure, and energy structure

The process structure and charge structure have a great relationship with the level of energy consumption. A reasonable process structure and charge structure play an important role in reducing energy consumption. The coking process must implement refined materials, with a necessary proportion of lean coal. It can improve the quality of coke and reduce the cost.     Fifth, promote the application of key technologies for energy saving and consumption reduction

 5. Promote key technologies for energy saving and consumption reduction, such as: converter gas recovery and comprehensive utilization technology, coke powder recycling technology, tundish insulation and longevity technology, water recycling technology, motor energy saving technology, etc. Learn from each other and promote applications with heart.

6. Promote technological progress and innovation

Energy saving and consumption reduction and the development of circular economy require a large number of mature advanced technologies to support. Promoting scientific and technological progress and innovation is the foundation and key to energy saving and consumption reduction and the development of circular economy. At present, enterprises have accumulated a lot of successful experience, but in general, there is still a gap in the promotion and application of advanced technology for energy saving and consumption reduction. Enterprises are the main body of energy saving and consumption reduction, and they must have a strong sense of responsibility and effective strategic measures. While further increasing investment in energy conservation and consumption reduction and vigorously promoting the application of advanced technology for energy conservation and consumption reduction, it is necessary to accelerate the construction of enterprise technological innovation system, strengthen the cooperation of industry, university and research, and organically combine promotion, application and innovation to form an independent enterprise with corporate characteristics Energy saving and consumption reduction technology system.

7, build a circular economy development model

The development of a circular economy is to take the efficient recycling of resources and energy as the core, to reduce, reuse, and recycle as the principle, to be characterized by low consumption, low emission and high efficiency, and to undertake the manufacturing functions and production process of coking products. The energy conversion and recycling function of the company, the disposal function of dissipating corporate waste, and the basic realization of the recycling and utilization of iron-containing materials, gas, wastewater, and solid waste, to become an environmentally friendly, socially-serving, and resource-saving enterprise. The development of circular economy is an effective way to realize energy saving and consumption reduction of coking enterprises and realize sustainable and coordinated development.

Reasonable recommendations for energy saving and consumption reduction (5):

Promote saving every kilowatt-hour of electricity:

1. Lighting, insist on turning off the lights at hand, putting an end to daylights and permanent lights, and using energy-saving lighting fixtures,
2. Air-conditioning, set the indoor temperature reasonably, the temperature of the air-conditioning should not be lower than 26℃ in summer, and not higher than 20℃ in winter. Do not turn on the air conditioner when there is no one. Turn off the doors and windows when turning on the air conditioner.
3. Office equipment, computers, printers, photocopiers and other office automation equipment should avoid long-term standby and reduce standby consumption. Turn off all indoor power switches before get off work,

Advocate to save every drop of water: avoid the phenomenon of open faucet and long running water, develop the habit of turning off the faucet easily, turn off the faucet when squeezing hand sanitizer or washing spirit,

Advocate saving every piece of paper: Advocate paperless office, reduce the frequency of paper document issuance and fax use, advocate double-sided paper, advocate the reuse of waste paper, all departments should actively recycle waste paper after printing and copying. Avoid leaking company secrets,

Promote saving every liter of oil:

1. Strengthen daily vehicle management, reasonably arrange vehicle delivery tasks, and the vehicle department needs to apply to the office in advance for comprehensive deployment,
2. Maintain the vehicle in time to reduce the occurrence of vehicle failures,
3. Advocate the use of bus cards. Unless there is an emergency or need to transport goods, the company can send buses. Department employees try to use public transport cards to take public transportation when going out. If there is no special situation, it is forbidden to use public transport cards for taxi and shopping.

Advocate saving every cent of office expenses: select reasonable office supplies manufacturers, purchase high-quality and low-priced office supplies, and reduce the cost of office supplies,

It is recommended to repair every piece of waste that can be used. For faulty equipment, try to repair the old and use waste, tap the potential to increase efficiency, and insist on reusing the reusable things.