What Is Induction Lighting

Introduction to induction light

The induction lamp is designed with imported technology MCU circuit, active infrared working mode, with good stability, strong anti-interference and other characteristics, with infrared decoding mode, widely used in demanding commercial and industrial occasions. It is a new generation of green energy-saving lighting.

Technical Description

The induction lamp adopts one-transmit and one-receive active infrared technology, integrated codec transmission, decoding receiving, control output, powerful 8-bit single-chip microcomputer system, industrial-grade chips, wide load capacity, strong anti-interference ability, and suitable for any place.

Function of induction light

The lighting can be turned on automatically, and it can be automatically turned off after a person leaves. This prevents artificial waste of energy, prolongs the service life of electrical appliances and integrates energy saving, convenience and security functions. Induction head diameter 21mm, sensing distance 0-5m, sensing angle: 120°, load: 40W (light bulb working voltage: 220V, working frequency: 50HZ, delay range 0.5min-5min, suitable for toilets, bathrooms, elevator halls and other places .

It is actually an automatic switch control circuit. There are many types. The way of closing the switch (that is, turning on the light) includes “voice control”, “trigger”, “sensing”, “light control”, etc. The opening method is basically the same It is controlled by a delay circuit (automatically disconnected after working for a period of time). If you are interested, you can take a look at the following introductions: Push type-there is a capacitor underneath, it is very thin, it will cause the voltage and resistance to change when you apply force, it is the so-called pressure-sensitive capacitor, the voltage change is amplified by the amplifier circuit, and the timing is turned on. Circuits and relays. Touch type-electrical conduction trigger, the button is metal, a weak current passes through you (conductor) and the earth to form a path, so that the light is on. The scope of application of the automatic infrared sensor switch-this product is suitable for corridors, corridors, warehouses, garages , Basements, toilets and other places for automatic lighting, ventilation and other purposes. It truly reflects the modernization of building intelligence and property management.

Features

1. Automatic control products based on infrared technology. When someone enters the switch sensing range, the dedicated sensor detects the change of the infrared spectrum of the human body, and the switch automatically turns on the load. When the person does not leave and is active, the switch continues to conduct; after the person leaves, the switch automatically turns off the load after a delay, the light turns on when the person arrives, and the light turns off when the person leaves.
2. With zero-crossing detection function: non-contact electronic switch to extend the service life of the load.
3. Application of photosensitive control, automatic light measurement on switch, no induction when the light is strong.
4. Power saving: Calculated by the corridor lights of one elevator and two households, the average annual electricity cost per household is less than 2.00 yuan
5. Security: The use of infrared sensing technology, no sound, no touch, to ensure that people come to the light and no dark areas, effectively improving the quality of living and security in modern residential quarters.
6. Beautiful: the design is elegant and pleasing to the eye, the installation is very convenient, and the taste of the community is improved.
7. Reliability of induction: Due to the use of thyristor circuits, the reliability is very high, and the number of induction operations is almost infinite. It is the best electronic circuit among similar products. The electronic circuit boards of other light sources use relays. The number of uses is clearly specified, and is directly affected by the quality of the relay, which is more likely to cause line failures.

The light source has a long service life: because of the use of incandescent lamps, there is no mutual interference of electronic circuits, and the service life of incandescent lamps is significantly extended, up to more than 2 years. Other light sources, such as electronic energy-saving lamps and ring-shaped lamps, are due to mutual interference. Disturbance factors, repeated use, it is very easy to turn black, causing the lamp to be scrapped, and the general service life is only about 6 months.

Using high-quality all-plastic lamp panel, it is not easy to be deformed/discolored/damaged, and transportation is extremely convenient.

8. The whole lamp has obvious price advantages among similar lamps, which can be accepted by dealers and users, and the market space is large.

The light source replacement cost is lower. The market price of branded 25W incandescent lamps is $1.00, and the annual average is $0.50. Energy-saving lamps or ring-shaped tubes have a market price of around $5.00. They need to be replaced more than twice a year. $10.00. Maintenance is very simple, because the structure of the lamp is reasonable, if the circuit board of the lamp is damaged, no special tools are required, and those with a little electrician knowledge can replace it by themselves (local dealers are all accessories). The choice of induction lamps can give priority to infrared and incandescent light sources. Induction lights are good.

 

Installation and debugging

1. Since the left and right sides of the switch have a larger sensing range than the upper and lower sides, when installing the switch, the positive axis should be as perpendicular as possible to the direction of the person’s walking passage, so as to achieve the best sensing effect.
2. After the switch is installed, power on. When the ambient light is sufficient, the bulb will flash three times. After one minute, the initialization will end, and the switch will enter the monitoring state. Use objects to cover the ambient light to make the switch sense to work, and people will not leave and are moving. The switch will continue to work; after the person leaves, the switch automatically delays the shutdown of the load.
3. After the switch is installed, power on. When the ambient light is insufficient, the switch will directly enter the monitoring state. If people do not leave and are active, the switch will continue to work.

 

Precautions

When installing, please install the smart lamp in a place where people often move (ceiling or wall) to improve its sensitivity and working range. Do not install on a damp ceiling or wall. When cleaning, disconnect the power first. Please choose a non-corrosive cleaning agent when cleaning. Do not use acidic or alkaline chemical solvents in a certain space after the lamp is installed, otherwise it will damage the electroplating or painting of the lamp.

1. Do not operate with electricity during installation, wait for the installation to complete before powering up.
2. Do not use it beyond the power range.
3. This switch is suitable for indoor environments, please do not install it in harsh outdoor environments.

 

Technical index

1. Working voltage: AC180V-250V- (50/60Hz)
2. Load power: 5W-200W
3. Load characteristics: innovative two-wire circuit design, applicable to various loads. (Inductive loads such as fluorescent lamps, energy-saving lamps, etc. need external compensators)
4. Static load: <0.5W
5. Sensing range: 140 degree cone angle, within 5-8 meters
6. Delay time: about 60 seconds. The induction faucet is made according to the principle of “cutting magnetic lines of force”. Humans are large conductors. When they are in the magnetic field formed by the surrounding 50Hz power grid, electromagnetic induction will occur. Inductively charged.

 

installation method

Confirm the voltage. Turn off the power before installation. The power cord is connected to 220VC, 50 (HZ), and fixed on the ceiling or wall through the chassis with 4×25 large flat-head self-tapping screws (need to be firmly fixed and safe).

Wiring (connect one wire of the lamp body power cord with the live wire with a terminal block, and the other with the neutral wire, and then pull the wire block strongly after connection), whichever comes first. Install the bulb, glass or back cover. You can power on for trial. When the product is powered on for the first time, there will be three consecutive lights on, indicating that it is normal, but it will not light up normally during the day or when the light is strong, and it will automatically turn on when people arrive at night when the light is low. For example, in the daytime, cover the infrared probe lens tightly with a black cloth, and after ten seconds (not allowing it to transmit light), you can also try its light to work.

 

Applicable occasions of induction light

Where are the LED human body sensors suitable for? According to its characteristics, the position that needs to be always on may not be suitable, but the following positions are more suitable.

1. Install LED human body induction light in corridor

Traditional induction lamps are installed in the corridors. They are generally composed of two parts. One is the human body induction panel switch, and the other is the light source. The light source is mostly incandescent. The two are separated. The line and location are well laid out. The tungsten filament in the incandescent lamp cannot withstand frequent switching, so the broken lamp must be replaced every year, and the manual maintenance cost is too high. The LED human body induction lamp has a built-in light source and human body induction device. You only need to install it and screw it into a general E27 lamp holder to achieve the human body induction lamp. When people come, the lights are on, and when people go, they are off. When it is installed at the corner of the upper and lower stairs, it can sense the people going up and down. In addition, the LED light source has a long life, low voltage operation, and frequent switching has no effect on it.

2. Install LED human body induction light on balcony

For a long time, most of the lighting fixtures on the balcony are an incandescent lamp or a ceiling lamp. The balcony is semi-outdoor. When the light is turned on at night, mosquitoes and flying insects will turn around the light. I don’t remember it from time to time in life. Turn off the lights on the balcony. Install an LED human body induction bulb or a human body induction LED ceiling light in this position. Both problems can be solved. LED is a cold light source, does not contain ultraviolet rays, and will not attract mosquitoes. It intelligently senses the human body. People often light up during activities on the balcony. On, the light is off after the person leaves, which saves electricity and is convenient.

3. Install LED human body induction lights in the property corridors

There are dozens of households in one building. It is also very suitable to install LED human body sensor lights in the public corridors on each floor. Whenever the owner goes home and walks out of the elevator, the LED sensor lights will turn on. In one minute, the owner has enough time to open his door and enter the house. Compared with the light bulb that is always on at this location, this saves much electricity. But to install this kind of lamps in this location, the real estate developer or the property can make a decision.

Fourth, install LED human body induction lights in the utility room

The utility room is too messy. The room is small and dark. You can’t see where the switch is when you go in. When you come out, you have to put down the things in your hand and turn off the lights. If it is so troublesome, install LED human body induction lights to solve it. Well, install it on the top of the room. When you open the door and enter, the light will automatically turn on. The light will always be on when you are looking for items. Take what you are looking for and go directly. You don’t have to be careful that no one turns off the light. , After 60 seconds, you look back and see that it has automatically turned off.

5. Install LED human body induction light in the bathroom

Isn’t it damp to install LED human body sensor lights in the bathroom? Don’t worry, the plastic shell of the lamp body and LED lamp beads are not afraid of humidity as the light source. When the person is in the bathroom, the light is always on. When the person walks away, because there is no need to press the switch, there is no fear of electric shock with wet hands.