What is LED Flood Light?

Flood light is a kind of point light source that can illuminate evenly in all directions. It irradiates the object uniformly from a specific point in all directions. Its irradiation range can be adjusted arbitrarily. Flood light is the most widely used light source in the production of renderings. Standard flood lights are used to illuminate the entire scene. Multiple flood lights can be applied to a scene. To produce better results. It is mainly used for large-area operation fields, building outlines, stadiums, overpasses, monuments, parks and flower beds, architectural decorative lighting, and commercial space lighting. Stylish and decorative ingredients.

Advantages of floodlights

Floodlight has excellent electrical performance,

• In general, the power of a flood light is relatively high. It uses a constant current for power supply and has a low harmonic current. Therefore, it can output a relatively constant light flux.
• The practical range of the flood light is relatively wide, and the installation is also convenient and quick.
• The light type design of the floodlight is small and exquisite, and the installation is convenient and quick. It can be installed in many ways without being restricted by the environment and location.
• The proportion of visible light in the floodlight is relatively high.
• In the light emitted by the floodlight, the degree of visible light has reached more than 80%, and the visual effect is very good.
• Flood light has good color rendering.
• Generally, when we use a flood light, it will emit relatively soft light. The object illuminated by the flood light has good gloss and the effect is natural. Its color rendering index is higher than 80.
• LED will not flicker. When the flood light is in use The floodlights produced after excellent craftsmanship have a very high work efficiency, and there will be no flicker, glare, etc. during work, which can further blur the eyes of the human body without causing eye fatigue.
• Flood light is an energy-saving lamp. With the popularization of LED light sources in the lamp market, more and more people apply LEDs to the production of lamps. Floodlights are no exception. They also use LEDs as their light source. Therefore, they are similar to ordinary lamps. In comparison, floodlights seem more energy efficient.
• Floodlights have a longer life span. The interior of the floodlight does not use filaments for production. Instead, it uses high-frequency electrodeless discharge lamps for production. Its irradiation time is about 60,000 hours or more, and the service life is longer than other traditional lamps.
• Flood light is an environmentally friendly lamp. When we make floodlights, we use solid mercury in its interior. If it is broken accidentally, we don’t have to worry about pollution to the environment. We can also recycle it when not using lamps. Use, environmental protection index is relatively high.

Applications of LED Flood Lights

1. Stage Lighting

a. High Lighting performances. The audience can clearly see the actors’ performances and scenery images.

b. Guide the audience’s eyes. Shaping the character’s image, accentuating emotions and showing stage illusions.

c. Create the space environment needed in the play.

d. Render the atmosphere in the play.

e. Display the change of time and space, highlight the contradictions of drama and strengthen the rhythm of the stage, and enrich the artistic appeal. Sometimes with stage effects.

2. Residential Lighting

a. In addition to the lighting of the room, the room must be comfortable, warm, relaxed and safe. Of course, the decorative effect of the lights is also a good way to show the occupants’ style. This was too shown in the last model room that was visited later.

b. Excessive changes between light and dark or between dark and light in the lighting design will produce glare and make the eyes very comfortable. The lack of light gives people a sense of dim, horror and shade. The light is too strong, and it shines directly into the eyes, causing glare.

3. Vehicle Lighting

a. Headlight

The main purpose is to illuminate the road and objects in front of the vehicle to ensure driving safety, including high beam and low beam lights. According to regulations, all cars must turn on the headlights after the illuminated street lights are turned on. Under normal circumstances, the irradiation distance of the low beam lamp is about 30-40 meters, and the irradiation range is about 160°.

b. Bit lights

The position lights are visible to other vehicles while driving in the evening. The function of the position light is to indicate the width of the car to remind the opponent and the rear car, so that other cars can judge the width and length of the car. The front position light can also be used for close range lighting at night. Some cars are specifically equipped with side lights on the side to indicate the width of the car. It is used during night driving and parking.

c. Fog lights

Since the anti-fog lamp has high brightness and strong penetrability, it will not cause diffuse reflection due to fog, so correct use can effectively prevent accidents. In foggy weather, the front and rear fog lights are usually used together.

d. Turn signal light

There are turn signal lights on the front and rear of some cars, and some cars also have turn signal lights on the side, rear window glass or rearview mirror. When the turn signal light is turned on, the front, rear and side turn signal lights of the side will flash at the same time to remind the surrounding cars and pedestrians to pay attention.

e. Brake lights

Also known as the brake light, it is red and is located on both sides of the rear of the car. Some cars also have high brake lights installed directly below or directly above the rear windshield. The brake light is used to show the rear vehicle that the front vehicle has braked. It should be checked frequently for normal operation.

f. Reversing lights

The reversing lights are located on both sides of the rear of the car. Once in reverse gear, the lights are on, and the vehicles and pedestrians behind the car are warned, indicating that the car is reversing, and the reversing lights are all white.

We have high-power LED floodlights and produce 1000W high-intensity lights. We have our own core technology for R & D and mass production, using the most advanced modular design, this design can replace each individual lamp at any time Without having to exchange the entire lamp.

All in all, this design is easy to install and maintain when using LED lights. The outdoor LED lamp set produced by our company has a very precise design with the same gap distance. The advantage of this design is that when the entire front of the lamp set is exposed to wind, it can weaken the wind. Effectively reduce the wind pressure of the lamp and play a protective role. Therefore, the LED lights designed by our company are more suitable for outdoor placement.

The lights produced by our company have adopted anti-glare system, which truly realizes the user’s health. Reflective light solves the problem of glare. Reflected light is used in swimming pools. They all adopt intelligent product design and manufacturing, and have a complete system of product testing standards to achieve product performance analysis and quality control at any time to meet market demand.